DIY Inexpensive and Durable Laminate Table Top Construction
Revamping a pair of nesting tables from a local thrift shop can be an exciting and cost-effective DIY project. Here's a step-by-step guide to help you create a unique and modern look using vinyl plank flooring.
## Materials Needed: - Peel-and-stick vinyl plank flooring - Clean rags - Utility scissors - Pencil - Straightedge or ruler - Laminate cutter or utility knife (optional) - Plywood or MDF (base material, if needed)
## Steps:
1. **Prepare the Table Top:** - Clean the table top thoroughly, removing any debris or dust. Sand any rough or damaged areas to create a smooth surface. - If the table top isn't flat, consider attaching a layer of plywood or MDF to create an even base.
2. **Measure and Plan:** - Measure the dimensions of your table top to determine how many vinyl planks you'll need. - Plan the layout from the center outward to ensure symmetry.
3. **Cut Guidelines:** - Draw guidelines on the table top with a pencil using a straightedge to mark where the planks will go. - Use a ruler to ensure straight lines.
4. **Apply Vinyl Planks:** - Place the first vinyl plank at the center of the table, aligning it with your guidelines. Peel off the backing and secure it to the table. - Continue applying planks from the center outward, ensuring tight fits and following the guidelines.
5. **Cut Planks for Edges:** - Use utility scissors or a laminate cutter to cut the planks to fit around the edges of the table. - Score and snap the planks if necessary to fit them snugly against the table edges.
6. **Secure Planks:** - Once all planks are in place, use a rolling pin or laminate roller to apply even pressure and secure them firmly to the table.
7. **Finish and Touch-ups:** - Inspect the table for any gaps or bubbles. Use a utility knife to trim any excess vinyl. - Apply a clear coat of polyurethane (optional) to seal the vinyl and protect it from scratches or spills.
By following these steps, you can create a water-resistant table top that looks like new. The table legs can be detached, cleaned, sanded, and spray painted with a tough spray paint for a fresh look. Leftover vinyl flooring can be used for this project, or free or cheap leftovers can be obtained from Home Depot. This tutorial provides a basic guide for transforming a table top with vinyl plank flooring. By following these steps, you can create a unique and modern look for your table.
Working on the home-and-garden aspect, you can apply the leftover vinyl plank flooring as a DIY project to revamp your lifestyle by creating a unique and modern table top. This water-resistant table top, complete with refurbished legs, not only adds a fresh look to your furniture but also provides a durable surface that is easy to clean.
